fbpx

Low alloy u bent tube

Low alloy U bent tube is a type of tubing that is made from low alloy steel and is bent into a U shape.

Please send your inquiry by   sales@sunnysteel.com

Category: Tag:

Description

Low alloy U bent tube is a type of tubing that is made from low alloy steel and is bent into a U shape.

Standard for Low alloy U bent tube

The semi-finished product for U bend tubes are heat exchanger tubes, manufactured and supplied according to DIN 28180 and ASTM A179.

Tubes for heat exchangers are made of steel according to:

Standard Application
ASTM A179 Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A192 Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A210 Seamless Medium-Carbon Steel Boiler and Superheater Tubes
ASTM A213 seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A334 Seamless Steel Pipe for Low-Temperature Service and other Applications with Required Notch Toughness
JIS G3461/2 carbon steel tubes used for heat exchange in boilers, heat exchangers, condensers, and similar equipment
EN10216-1/2 specified the standard of cold processed precision steel tubes in a wide range of sizes
DIN17175 seamless tubes for high-pressure and high-temperature applications, specifically for boilers and heat exchangers

Chemical Composition and Mechanical Properties (Part)

Standard Grade Chemical Components (%) Mechanical Properties
C Si Mn P S Mo Cr V T.S.  (Mpa) Y.S.  (Mpa) E.L.
(%)
Hardness
(HRB)
ASME SA179 SA179 0.06-0.18 / 0.27-0.63 ≤0.035 ≤0.035 / / / ≥325 ≥180 ≥35 ≤72
ASME SA192 SA192 0.06-0.18 ≤0.25 0.27-0.63 ≤0.035 ≤0.035 / / / ≥325 ≥180 ≥35 ≤77
ASME SA210 A1 ≤0.27 ≥0.10 ≤0.93 ≤0.035 ≤0.035 / / / ≥415 ≥255 ≥30 ≤79
C ≤0.35 ≥0.10 0.29-1.06 ≤0.035 ≤0.035 / / / ≥485 ≥275 ≥30 ≤89
ASTM A333 /A334 GR.1 ≤0.30 / 0.4-1.06 ≤0.025 ≤0.025 / / / ≥380 ≥205 ≥35 -45°
GR.6 ≤0.30 ≥0.10 0.29-1.06 ≤0.025 ≤0.025 / / / ≥415 ≥240 ≥30 -45°
GR.8 ≤0.13 0.13-0.32 ≤0.90 ≤0.025 ≤0.025 / / 8.40-9.60 ≥690 ≥515 ≥22 -195°

U bend tubes for heat exchangers applied mostly in oil and gas plants, chemical and petrochemical plants, refineries, power plants and renewable energy plants. Low fin tubes can be supplied in the form of U bends.

U-Bend Fabrication Tolerances

U-bend tubes are widely used in heat-exchanger systems. Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential in strategically important and critical fields — nuclear and petrochemical machine building.

U bend tube drawing
Item Condition (when) Tolercance
 Ovality Nominal bend radius ≤ 2 x nominal OD less than or equal to 12%
2 x nominal OD < Nominal bend radius ≤ 4 x nominal OD less than or equal to 10%
Nominal bend radius > 4 x nominal OD less than or equal to 5%
Nominal bend radius ≤ 2 x nominal OD 0.75 x nominal wall
Mimimum wall thickness 2 x nominal OD < Nominal bend radius ≤ 4 x nominal OD 0.8 x nominal wall
Nominal bend radius > 4 x nominal OD 0.9 x nominal wall
Nominal bend radius ≤ 8″ (200mm) +/-3/64″(1mm)
Bending Radius 8″ (200mm) < Nominal bend radius ≤ 16″ (400mm) +/-1/16″(1mm)
Nominal bend radius >16″ (400mm) +/-5/64″(1mm)
Disrance between legs Max 1/16″(1.5mm)
Wall thinning of bending area Max 17%
Difference between leg lengths at the ends Leg length ≤ 16′ (4.88m) +1/8″(3mm)
Leg length > 16′ (4.88m) +3/16″(5mm)
Deviation from plane of bend ≤ 3/16″(1.5mm)
Flattening on bend ≤ 10% nominal diameter
Straight leg length ≤5m +1/8″(3mm)
>5m +3/16(5mm)
Total tube length including radius ≤6m +3/16(5mm)
>6m +5/16″(8mm)

The purpose of the U bend in the tube is to allow for easy installation and routing of fluid or gas in a piping system, without the need for additional fittings or connections. Low alloy steel is used in these tubes because it has a lower cost compared to stainless steel, and is suitable for applications where corrosion resistance is not critical. These tubes are commonly used in industrial, oil and gas, and petrochemical industries for heat exchangers, boilers, and condensers.

Low alloy U-bent tubes are a type of heat exchanger tube that are made from low alloy steel and are bent into a U-shape to fit into heat exchanger units. They are designed to withstand high temperatures and pressures, making them ideal for use in industrial applications.

Measuring, cutting, deburring and cleaning of U bent tube

  • U-bend pipes are measured exactly in accordance with relevant standards.
  • All U bend pipes are cut to the specified leg lengths, ends are deburred and the u bend tubes are internally cleaned with air.
  • Before packing, both ends of U-bend pipes are capped with plastic caps.

U bending tube is carried out by cold working method and is being done to the necessary bend radius as per client drawings. U-bend tube/pipe can be manufactured from an extensive range of pipe materials that contain high and low yield stainless steels, alloy steels, carbon steels,Monel , Inconel, hastelloy,duplex , super duplex,titanium,copper alloy and Cr-Ni alloys. Usually U-bends manufactured from seamless tube, can further be customized in terms of thicknesses and sizes as per the specific requirements of our clients. They are easy for further assemble tube bundles.

Low alloy U bent tube drawing

We provide U bend Tubes pipe in diverse industries for a range of applications such as in Boiler, Condensers, Super Heaters,tube bundles for Heat Exchangers, Coolers/Inter-coolers, Chiller, and so on. These are as well being used in dissimilar industries such as in Fertilizer Plants, Sugar Industry, Steel Plants,Oil & Gas plants, Chemical & Petrochemical plants, Refineries, Power plants, Renewable energy plants etc.

Standard

The semi-finished product for U bend tubes are heat exchanger tubes, manufactured and supplied according to DIN 28180 and ASTM A179. Tubes for heat exchangers are made of steel according to:

  • ASTM A688/A688M
  • ASTM A803/A803M
  • ASTM A556/A556M, ASME SA-556
  • ASME SA-179/SA213

other types of steel can be supplied by agreement.

U bend tubes for heat exchangers applied mostly in oil and gas plants, chemical and petrochemical plants, refineries, power plants and renewable energy plants. Low fin tubes can be supplied in the form of u bends.

 

Dimension control on U bend tubes

  • Ovality of straight and bending tube parts
  • Thinning of straight and bending tube parts
  • Leg spacing length
  • U bend tube length (leg + radius + (0,5 x OD))
  • Difference between legs length
  • Straightness of legs
  • Deviation from bend plane
  • Twist of bending portion
  • Squareness and cleanliness of tube ends
  • Complete visual control

Heat treatment of U bend tubes

Post bending heat treatment by electrical resistance (Joule effect) is applied. The temperature is monitored and controlled during the process. It is possible to perform the heat treatment in a nitrogen atmosphere.

Heat Treatment Equipment

  • Heat treatment equipment is computer controlled with the added facility of data recording.
  • An argon protective atmopshere is used inside stainless and special alloy tubes during heat treatment.
  • We can provide all types of annealing; solution annealing and stress relieving.

U bend tubes can be tested as follows

  • Hydrostatic Test
  • Air Underwater Test
  • Pulsating Pressure Test
  • Dye Penetrant Test
  • Magnetoscopic test

Sizes tolerances of U bend tubes are to fulfil the requirements of: ASTM A556 / 556M and DIN 28 179

Materials

‘U’ bends are produced, controlled and measured fully in accordance with relevant standards.

Material / Grade

  • Carbon Steel – SA 179 / A 179
  • Carbon Steel – SA 210 / A 210
  • Carbon Steel – SA 334 / A 334
  • Stainless Steel – SA 213 / A 213
  • Duplex Stainless Steel – SA 789 / A 789
  • Copper & Cu Alloys – SB 111 / B 111
  • Titanium & Ti Alloys – SB 338 / B 338

Tolerances

Here is a list for providing ovality, minimum wall thickness, bending radius, distance between legs, wall thinning of bending area and so on. Thus, we can figure out which kind of type would be our final choice for our engineering project.

  • ‘U’ bending is done by cold working process.
  • ‘U’ bending is done to the required radius as per customer drawings.
  • The bend portion and six inch leg is stress relieved by resistance heating.
  • Inert gas (Argon) is passed through it at the required flow rate to avoid oxidation in ID.
  • The radius is checked for its OD and wall thinning with the recommended specification.
  • The physical properties and micro-structure is checked at three different position.
  • Visual inspection for waviness and cracks is done with Dye Penetrant Test.
  • Each tube is then hydro tested at the recommended pressure to check for leakage.
  • Cotton ball test is done to check the ID cleanliness of the tube.
  • Thereafter pickled, dried, marked and packed.
U-bend tubes are widely used in heat-exchanger systems. Heat-exchanger equipment on the basis of seamless stainless u-tubes is essential in strategically important and critical fields — nuclear and petrochemical machine building.
ItemCondition (when)Tolercance
Nominal bend radius ≤ 2 x nominal ODless than or equal to 12%
Ovality2 x nominal OD < Nominal bend radius ≤ 4 x nominal ODless than or equal to 10%
Nominal bend radius > 4 x nominal OD less than or equal to 5%
Nominal bend radius ≤ 2 x nominal OD0.75 x nominal wall
Mimimum wall thickness2 x nominal OD < Nominal bend radius ≤ 4 x nominal OD0.8 x nominal wall
Nominal bend radius > 4 x nominal OD0.9 x nominal wall
Nominal bend radius ≤ 8" (200mm)+/-3/64"(1mm)
Bending Radius8" (200mm) < Nominal bend radius ≤ 16" (400mm)+/-1/16"(1mm)
Nominal bend radius >16" (400mm)+/-5/64"(1mm)
Disrance between legsMax 1/16"(1.5mm)
Wall thinning of bending areaMax 17%
Difference between leg lengths at the endsLeg length ≤ 16' (4.88m)+1/8"(3mm)
Leg length > 16' (4.88m)+3/16"(5mm)
Deviation from plane of bend≤ 3/16"(1.5mm)
Flattening on bend≤ 10% nominal diameter
Straight leg length≤5m+1/8"(3mm)
>5m+3/16(5mm)
Total tube length including radius≤6m+3/16(5mm)
>6m+5/16"(8mm)

Appication

U-bend tubes are widely used in heat-exchanger systems.

Heat-exchanger equipment on the basis of seamless stainless U-tubes is essential in strategically important and critical fields — nuclear and petrochemical machine building.

“U bend tubes for heat exchangers applied mostly in Oil & Gas plants, Chemical & Petrochemical plants, Refineries, Power plants, Renewable energy plants.”
  • Object medium: 10% sodium
  • hydroxide+5% sodium hypochlorite
  • Shell Diameter: ø 800
  • Working Pressure: 1.5mpa
  • Working Temperature: 40º C-90º C
  • Heat Exchange Surface Area: 100M2
  • Material: Gr1Gr2

Carbon steel heat exchanger condenser tubing

U tube heat exchanger

U tube heat exchanger is characterized by its simple structure, good tightness, convenient maintenance and cleaning, low cost, good thermal compensation performance and strong pressure bearing capacity. The U-tube heat exchanger has the largest heat exchange area under the same diameter. The main structure of U-shaped tube heat exchanger includes tube box, cylinder, head, heat exchange tube, nozzles, baffle, anti-shock plate and guide tube, anti-short circuit structure, support and other accessories of the shell and tube side, is the most commonly used in shell and tube heat exchanger.

Tube sheet

Tube sheet is one of the most important parts of shell – tube heat exchanger. The tube plate is the barrier between the shell side and the pipe side. When the heat exchange medium has no corrosion or slight corrosion, it is generally made of low carbon steel, low alloy steel or stainless steel. The connection form of tube-sheet and shell is divided into non-detachable and detachable types. The former is the connection between tube-sheet and shell in the fixed tube-sheet heat exchanger. The latter, such as U-shaped tube type, floating head type and stuffing box type and sliding tube plate type heat exchanger tube plate and shell connection. For removable connections, the tube plate itself is usually not in direct contact with the shell, but the flange is connected to the shell indirectly or is clamped by two flanges on the shell and the tube box.

Tube box

Most of the shell tube heat exchangers with larger shell diameters adopt tube and box structures. The tube box is located at both ends of the heat exchanger, which evenly distributes the fluid from the pipe to the heat exchanger tubes and gathers the fluid in the tubes together to send out the heat exchanger. In a multi-pipe shell, the casing can also change the flow direction. The structure of the tube box is mainly determined by whether the heat exchanger needs to be cleaned or whether the tube bundle needs to be divided.
Perhaps the best known use of tube sheets are as supporting elements in heat exchangers and boilers. These devices consist of a dense arrangement of thin walled tubes situated inside an enclosed, tubular shell. Tubes are supported on either end by sheets which are drilled in a predetermined pattern to allow the tube ends to pass through the sheet. The ends of the tubes which penetrate the tube sheet are expanded to lock them in place and form a seal. The tube hole pattern or “pitch” varies the distance from one tube to the other and angle of the tubes relative to each other and to the direction of flow. This allows the manipulation of fluid velocities and pressure drop, and provides the maximum amount of turbulence and tube surface contact for effective Heat Transfer.

In cases where it is critical to avoid fluid intermixing, a double tube sheet can be provided. The design of tube sheets is a fairly precise and complex process; the exact number of tubes needs to be established and a pattern of holes calculated to spreads them evenly over the tube sheet surface. Large exchangers may have several thousand tubes running through them arranged into precisely calculated groups or bundles. Sheet design and production is largely automated these days with computer software (like CAD) performing the calculations and the tube sheet drilling done on computer numerical control (CNC) machines. In this design, the outer tube sheet is outside the shell circuit, virtually eliminating the chance of fluid intermixing. The inner tube sheet is vented to atmosphere so any fluid leak is easily detected. Duwa Piping factory drilling department has professional drilling equipment and working team, we can provide the best quality tube sheet for you.

U bend Fin tubes

Customized Bent Extruded Fin Tube
Fin tubes are used in applications involving the transfer of heat from a hot fluid to a colder fluid through a tube wall. Furthermore, finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside.

Delivery

Inspection

Before their shipment, we will conduct a comprehensive inspection. The inspection contains: size, thickness, length, radius and marking.

Size inspection

304 SS PMI test

PMI test

Packing

Any type of packing U bend tubes is available according to customer need to worldwide destinations.

Stainless steel U bend tubes

Stainless steel U bend tubes

SA 213 TP347H stainless tubes

SA 213 TP347H stainless tubes

ASTM A179 U bend tubes

ASTM A179 U bend tubes

U bend tubes are packed in wooden cases

U bend tubes are packed in wooden cases

Inquiry

Need to inquire about our products? Fill out the form below and our staff will be in touch!

Contact Form Demo

FAQ

Q: How long is your delivery time?
A: The delivery time of customized products is generally 25 35 days, and non customized products are generally shipped within 24 hours after payment.

Q: Do you provide samples? Is it free?
A: If the value of the sample is low, we will provide it for free, but the freight needs to be paid by the customer. But for some high value samples, we need to charge a fee.

Q: What are your payment terms?
A: T/T 30% as the deposit,The balance payment is paid in full before shipment

Q: What is the packaging and transportation form?
A: Non steaming wooden box and iron frame packaging. Special packaging is available according to customer needs. The transportation is mainly by sea.

Q: What is your minimum order quantity?
A: There is no minimum order quantity requirement. Customized products are tailor made according to the drawings provided by the customer.