The integrally formed wear-resistant ceramic sleeve lined pipes are mainly used in special industries such as lithium batteries. Because the lithium battery industry needs to isolate metal pollution in material transportation, the wear resistance and insulation of the wear-resistant ceramic ring have become the best choice for the lithium battery industry. So how should the wear-resistant ceramic sleeve be installed?
It mainly includes the following 3 steps.
(1) Porcelain ring splicing: The porcelain rings that have passed the inspection are spliced with 502 quick-drying glue according to the requirements of the drawings to ensure that the interior is flat and there are no large gaps.
(2) Porcelain ring paste: The flanges on both sides of the pipe are wrapped with kraft paper, and the adjusted adhesive is used to open the pipe in the pipe to ensure that it is uniform, and then the glue is opened on the spliced ceramic ring pipe to ensure that the pipe is intact. Stick to the inner wall of the pipe. After fixing, check whether there is any dislocation and leakage of glue on the inner wall of the pipe. After checking, place the pasted pipe in the designated position. The ceramic paste should be operated in strict accordance with the drawings. When the ceramic ring is pasted, the ceramic should be properly dislocated to ensure the service life of the pipeline.
(3) Grinding: After the adhesive is completely cured, grind the excess ceramic rings on both sides of the pipe to ensure that they are flat and do not damage the flange. After grinding, remove the kraft paper at both ends.